Blister Glue Kit (instant glue+instant glue gel+clean adhesive)

Blister Glue Kit (instant glue+instant glue gel+clean adhesive)

Contents:
ULTRA QUICK GLUE
To stick: Plastics, ceramics, rubber, porcelain, hard wood, marble, metals, mother-of-pearl, ivory, glass, etc.

How to use: The surfaces to be joined should be clean, dry and without dust or grease. Apply a small amount of glue. One drop is enough. If too much is used effectiveness is reduced as well as the time to join parts. Join the parts together, avoiding contact with fingers. Press for about 15-30 seconds, enough time for it to set, reaching maximum resistance after about 12 hours. Dry the tip after use and turn the top until it is completely closed. Remove any residues by rubbing with acetone. Keep in a cool dry place and away from light.

ULTRA QUICK GLUE IN GEL
To stick: Plastics, ceramics, rubber, porcelain, hard wood, marble, metals, mother-of-pearl, ivory, glass, etc.

How to use: The surfaces to be joined should be clean, dry and without dust or grease. Apply a small amount of glue. One drop is enough. If too much is used effectiveness is reduced as well as the time to join parts. Join the parts together, avoiding contact with fingers. Press for about 15-30 seconds, enough time for it to set, reaching maximum resistance after about 12 hours. Dry the tip after use and turn the top until it is completely closed. Remove any residues by rubbing with acetone. Keep in a cool dry place and away from light.

ADHESIVE CLEANER
Valid for: Eliminating excesses of glue and glue from hands. It removes glue stains from: wood, plastic, metal, rubber, glass, melamine, paper and cardboard.

The INSTANT ADHESIVE CLEANER removes stains and excess glue from all types of surfaces. Its format enables it to reach all corners using accurate and exact application and can even be applied to vertical surfaces.

How to use: Apply a layer of the product so that the affected surface is completely covered in the cleaner. Place a piece of absorbent paper over the surface to absorb the glue and leave it for 2-4 minutes. Remove the paper and eliminate remains by rubbing lightly. Wipe with a damp cloth. On hands: as soon as you can feel the glue becoming soft remove with absorbent paper. Wash with plenty of soap and water.

Display units: 12 u.

Packaging units: 120 u.

Ref. 15022